- Professionel rådgivning
- Nem og sikker nethandel
- Mulighed for EAN betaling
› 14.4V V-mount Hotswap
› Dedicated for ALEXA MINI/MINI LF
› 43Wh, 200W constant load cells inside
› At least 2 minutes run time
› Countdown seconds display
› D-tapx2, 2-pin LEMO, USB output
› 8-pin LEMO input for power station hotswap
› Aluminum CNC unibody housing
› MINI LF system RAB-1 Clamp2 install
› Provide 15mm rod clamp for old MINI system
› Multiple circuit protections
KA-R30S is a V-mount extended plate dedicated for ARRI ALEXA MINI and MINI LF install. The plate has battery cells inside, and when you changing battery, the plate will take over the power supply for at least 2 minutes, till a new battery is mounted on.
So you don' t need to switch off the cameras with this hot-swap plate.
KA-R30S matches with ARRI original MINI / MINI LF support system by connection with RAB-1 Clamp 2 (K2.0023406).
* The KA-R30S plate doesn’ t include the K2.0023406 clamp.
KA-R30S has CNC alluminum housing, 4 battery cells inside, 14.4V nominal voltage, 43Wh capacity, 200W constant high load.
The full capacity plate will ensure at least 2 minutes at 200W load even after 1000 cycle times.
The hotswap plate provides an LCD screen to display countdown seconds when changing battery. When battery is removed, the screen will countdown from 120s. You just need to put on a new battery before it count down to 0.
The new battery will charge the hotswap plate as well.
You can see the countdown seconds will go back to 120s after a period of time.