RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE

RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE

Name: RØDE NTG 1 DIRECTIONAL CONDENSER MICROPHONE
Brand: Rode
SKU: NTG1
Price: 1485.0 DKK
Availability: InStock

RodeVarenummer:NTG1

Professionel rådgivning
Nem og sikker nethandel
Mulighed for EAN betaling

Del dette produkt

Key Features

For Indie Films, TV & Documentaries
Phantom Powered
Selectable 80 Hz Low-Cut Filter
Low Handling Noise
High Maximum SPL before Distortion
Slight Presence Boost
Windscreen Reduces Wind Noise
Lightweight Metal Housing

Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG1 shotgun microphone.

With low handling noise and the ability to endure loud sound sources before distortion, the NTG1 offers a cost-effective solution for recording clean dialogue and sound effects.

The NTG1's elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp.

Sonically, the NTG1 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter.

The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.

Quality Sound Capture

The combination of the NTG1's 8.6" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides.

Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.

Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

Phantom Powered

Thanks to its 3-pin XLR output and compliance with 24V or 48V phantom power, the NTG1 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Boompole Mounting

The NTG1 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG1 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

Windscreen Minimizes Wind Noise

The NTG1 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.

For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

Microphone

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Line Gradient
Capsule	Condenser
Diaphragm	0.5" / 12.70 mm
Polar Pattern	Supercardioid
Orientation	End Address
Circuitry	Solid-State (JFET)
Pad	None
High-Pass Filter	80 Hz, 12 dB/Octave
Tone Adjustment	None
Indicators	None
On-Board Controls	High-Pass Filter
Windscreen	Foam (Included)

Performance

Frequency Range	20 Hz to 20 kHz
Maximum SPL	139 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection	14 dB at 60° 16 dB at 120° 12 dB at 180°
Impedance	50 Ohms
Sensitivity	-36 dBV/Pa at 1 kHz
Output Level	6.9 mV (Max)
Dynamic Range	121 dB
Signal-to-Noise Ratio	76 dB A-Weighted (1 kHz)
Equivalent Noise Level	18 dB A-Weighted

Connectivity

Output Connectors (Analog)

1 x XLR 3-Pin

Power

Operating Voltage

24 to 48 V

Physical

Color	Black
Mounting	3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction Material	Aluminum
Dimensions	ø: 0.87 x L: 8.62" / ø: 22 x L: 219 mm
Weight	3.7 oz / 105 g (Microphone)