RØDE NTG4+ SHOTGUN MICROPHONE (W BATTERY)

RØDE NTG4+ SHOTGUN MICROPHONE (W BATTERY)

Name: RØDE NTG4+ SHOTGUN MICROPHONE (W BATTERY)
Brand: Rode
SKU: NTG4+
Price: 1850.0 DKK
Availability: InStock

RodeVarenummer:NTG4+

Professionel rådgivning
Nem og sikker nethandel
Mulighed for EAN betaling

Del dette produkt

Key Features

For Indie Films, TV & Documentaries
Convenient Digital Switching
Internal Battery or Phantom Powered
Switchable Treble Boost and -10 dB Pad
Selectable 75 Hz Low-Cut Filter
Low-Noise Circuitry
High Sensitivity and High Max SPL
Warm and Natural Tone
Windscreen Reduces Wind Noise
Lightweight Metal Housing

Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4+ battery- or phantom-powered shotgun microphone.

Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production.

The elevated sensitivity of the NTG4+ allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG4+ delivers warm sound due in part to its gentle dip in high frequencies and its rumble-reducing selectable low-cut filter.

A switchable treble boost is on hand for situations where additional clarity is needed.

Quality Sound Capture

The combination of the 10.9" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.

Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

Internal Battery or Phantom Powered

Operate the NTG4+ on 48V phantom power or via its internal rechargeable lithium battery, which provides up to 150 hours of run time.

The micro-USB port and supplied USB cable enable easy recharging in just two hours—charge the NTG4+ via a computer, power brick, or vehicle.

Thanks to its 3-pin XLR output, the NTG4+ is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.

Customizable Tone via Digital Switching

Digital switching not only allows for intuitive access to the mic's settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic.

Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level.

Ideal for Boompole Mounting

The lightweight, metal-bodied NTG4+ includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4+ in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.

Windscreen Minimizes Wind Noise

The NTG4+ has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.

For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

Microphone

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Line Gradient
Capsule	Condenser
Diaphragm	0.5" / 12.70 mm
Polar Pattern	Supercardioid
Orientation	End Address
Circuitry	Solid-State
Pad	-10 dB
High-Pass Filter	75 Hz
Tone Adjustment	High Boost: +6 dB
Indicators	Single LED (Status, Power)
On-Board Controls	High-Pass Filter, HF, Pad, On/Off
Windscreen	Foam (Included)

Performance

Frequency Range	20 Hz to 20 kHz
Maximum SPL	135 dB SPL
Off-Axis Rejection	5 dB at 60° 24 dB at 120° 18 dB at 180°
Impedance	200 Ohms
Sensitivity	-32 dBV/Pa at 1 kHz
Dynamic Range	119 dB
Signal-to-Noise Ratio	78 dB
Equivalent Noise Level	16 dB A-Weighted

Connectivity

Output Connectors (Analog)

1 x XLR 3-Pin

Power

Operating Voltage	48 V
Operating Current Consumption	4.8 mA (Phantom Power)
Battery Type	1 x Built-In
Battery Chemistry	Lithium-Ion
Approximate Battery Life	150 Hours

Physical

Color	Black
Mounting	3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction Material	Metal
Dimensions	ø: 0.87 x L: 10.94" / ø: 22 x L: 278 mm
Weight	6.21 oz / 176 g (Microphone)