Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4+ battery- or phantom-powered shotgun microphone.
Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production.
The elevated sensitivity of the NTG4+ allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG4+ delivers warm sound due in part to its gentle dip in high frequencies and its rumble-reducing selectable low-cut filter.
A switchable treble boost is on hand for situations where additional clarity is needed.
Quality Sound Capture
The combination of the 10.9" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
Internal Battery or Phantom Powered
Operate the NTG4+ on 48V phantom power or via its internal rechargeable lithium battery, which provides up to 150 hours of run time.
The micro-USB port and supplied USB cable enable easy recharging in just two hours—charge the NTG4+ via a computer, power brick, or vehicle.
Thanks to its 3-pin XLR output, the NTG4+ is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.
Customizable Tone via Digital Switching
Digital switching not only allows for intuitive access to the mic's settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic.
Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level.
Ideal for Boompole Mounting
The lightweight, metal-bodied NTG4+ includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4+ in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.
Windscreen Minimizes Wind Noise
The NTG4+ has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.
For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).
Specifikationer
Microphone
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Line Gradient
Capsule
Condenser
Diaphragm
0.5" / 12.70 mm
Polar Pattern
Supercardioid
Orientation
End Address
Circuitry
Solid-State
Pad
-10 dB
High-Pass Filter
75 Hz
Tone Adjustment
High Boost: +6 dB
Indicators
Single LED (Status, Power)
On-Board Controls
High-Pass Filter, HF, Pad, On/Off
Windscreen
Foam (Included)
Performance
Frequency Range
20 Hz to 20 kHz
Maximum SPL
135 dB SPL
Off-Axis Rejection
5 dB at 60° 24 dB at 120° 18 dB at 180°
Impedance
200 Ohms
Sensitivity
-32 dBV/Pa at 1 kHz
Dynamic Range
119 dB
Signal-to-Noise Ratio
78 dB
Equivalent Noise Level
16 dB A-Weighted
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin
Power
Operating Voltage
48 V
Operating Current Consumption
4.8 mA (Phantom Power)
Battery Type
1 x Built-In
Battery Chemistry
Lithium-Ion
Approximate Battery Life
150 Hours
Physical
Color
Black
Mounting
3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction Material
Metal
Dimensions
ø: 0.87 x L: 10.94" / ø: 22 x L: 278 mm
Weight
6.21 oz / 176 g (Microphone)
Returneringspolitik
14 DAGES FULD RETURRET: Hvis du fortryder dit køb af et fysisk produkt inden 14 dage, så skal du senest inden de 14 dage kontakte os på info@avsnordic.com om dit køb og du vil få pengene retur.
Du skal afholde de direkte udgifter i forbindelse med varens returforsendelse. Du bærer risikoen for varen fra tidspunktet for varens levering.
Fortrydelsesret ved salg til erhvervsdrivende Der gælder ikke fortrydelsesret ved salg til erhvervsdrivende. Returnering af varer kan alene ske efter forudgående aftale, og AVS Nordic forbeholder sig retten til at opkræve et gebyr til dækning af omkostninger ved håndtering af returvarer.
Vi modtager hverken pakker uden omdeling eller pakker sendt pr. efterkrav.
Reklamationsret ved salg til erhvervsdrivende Producenternes individuelle garanti- og reklamationsvilkår videregives til køber. Der ydes som minimum 1 års reklamationsret at regne fra oprindelig fakturadato.
Ombytning eller afhjælpning af en mangel medfører ikke fornyet reklamationsret i 1 år frem. Omkostninger til forsendelse i forbindelse med reklamationssager afholdes af kunden.
Varen skal være ubrugt Hvis varen er ødelagt eller brugt, kan du ikke få dine penge retur.
Du vil blive stillet videre til https://videoudstyr.dk/pages/returvare hvor du vil blive bedt om at udfylde dine informationer og printe din returlabel.
En vare må ikke være åbnet/brudt op eller brugt for en 100% returret.
Der kan forekomme gebyr på returnering af udstyr hvis der har været udgifter i forbindelse med købet fra AVS shop.
Andre produkter
Senest set
Sikker nethandel
Du handler sikkert og kan også benytte EAN / Faktura hos os
Vi er dine rådgivere
Når du har brug for professionel rådgivning er vi førende i branchen
Bestil inden kl. 14
Bestiller du inden kl. 14:00 kan vi måske nå at sende dit udstyr i dag