Sirui VHD-2004+VH-10 Videokit


Pris:
Udsalgs pris
2.285,00 kr
Lager:
På lager

Key Features
  • Load Capacity: 33.1 lb
  • Maximum Height: 68.9"
  • Minimum Height: 9.1"
  • VH-10 Fluid Ball Head with Pan Handle
  • 4 x Leg Sections
  • 3 x Bubble Levels
  • Weight: 5.5 lb
  • Removable Leg for Monopod Use
  • Twist Leg Locks
  • Aluminum Construction


This aluminum VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head from Sirui consists of four-section padded legs, a rotating ball head, and a fluid head that together weigh 5.5 lb.

The legs tighten with twist locks that adjust with a simple turn to extend the legs to a maximum height of 68.9". A second, short center column is included which allows you to drop the tripod to a minimum height of 9.1" without having to lift the column up. One of the tripod legs disconnects and can be used as a monopod, if desired. A bubble level on the top of the legs helps with balance. The rubber feet are removable and can be swapped out for optional spikes, and the tripod also features a 1/4"-20 accessory mount.

The ball head is installed on top of the tripod and supports compact DSLR or midsize cameras weighing up to 33.1 lb. A separate pan lock disengages and allows the head to rotate 360°. The ball also moves freely after unlocking the head's lever lock, and at the same time the cut notch on the side of the head permits you to position a camera at a set angle. The VH-10 fluid head connects to the ball head and features two bubble levels and a telescoping pan handle. A quick release plate with 1/4"-20 and 3/8"-16 threaded mounting screws is included with the head.

  • VHD-2004 tripod with padded four-section legs, ball head, and VH-10 fluid head
  • Load capacity of 33.1 lb, 5.5 lb weight, maximum height of 68.9", and minimum height of 9.1"
  • Twist leg locks and removable leg for use as a monopod
  • Quick release plate with 1/4"-20 and 3/8"-16 mounting screws
  • One bubble level on the legs and two on the fluid head help with balance

Camera Plate
Camera Plate Features Sliding Balance Plate, Quick Release
Camera Mounting Screw 1 x 1/4"-20 Male

Head
Base Mount 1/4"-20 Thread
Bubble Level 2
Accessory Mounting 1 x 1/4"-20 Female Thread

Pan & Tilt
Panning Range None

Legs
Leg Lock Type Twist Lock
Leg Positions Locking 3 Positions and Continuously Adjustable
Independent Leg Spread Yes
Leg Sections 4
Bubble Level Yes
Feet Features Rubber
Spreader None

Detachable Monopod
Leg Sections 4
Monopod Foot Features Removable, Retractable, Rubber

General
Load Capacity 33.07 lb / 15 kg
Maximum Working Height 68.9" / 175.01 cm
Minimum Working Height 9.1" / 23.11 cm
Materials Aluminum
Weight 5.5 lb / 2.49 kg

Payment & Security

Dankort Mastercard MobilePay Visa

Dine betalingsoplysninger behandles sikkert. Vi gemmer ikke kreditkortoplysninger og har heller ikke adgang til dine kreditkortoplysninger.

Estimer forsendelsesomkostninger

Relaterede varer

Recently viewed