Professionel rådgivning
Nem og sikker nethandel
Mulighed for EAN betaling
- USB Connection
- Includes Boom Arm and Shock Mount
The Podcaster Studio is a B&H Kit providing a professional microphone solution for the podcaster.
The kit includes an "end-address" microphone, along with a shockmount and spring-loaded, studio boom arm.
The microphone does not require a preamp and additionally can be plugged straight into a computer via a USB connection.
A built-in headphone input and amplifier with volume control further simplifies the process of recording material destined for future podcasting.
Great Sound for Your Podcasts
Works with Your Setup
Directional Polar Pattern for Home Use
Built-In 3.5mm Headphone Jack
Professional Audio Capture
Simple to Set Up
Thoughtful Appointments
Rode PSM1 Shockmount for Rode Podcaster or Procaster Microphone
The Rode PSM1 Shockmount is designed to hold a Rode Podcaster or Procaster microphone. Attach it to a studio boom arm such as the Rode PSA1, or to a mic stand like the Rode DS1 (microphones, boom arms, and mic stands available separately).
The shockmount provides adequate protection against noise caused by movement, vibration, noise, etc.
Auray BAI-2U Two-Section Broadcast Arm with Internal Springs and Integrated USB Cable
The Auray BAI-2U is a two-section broadcast arm with internal springs and an integrated USB cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It's ideal for broadcast, voiceover, and podcasts.
The BAI-2U broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm.
The broadcast arm features a standard 5/8"-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm.
This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360°, the BAI-2U allows for precise microphone placement.
The BAI-2U also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick.
The C-clamp's slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included).
A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.
Versatile
Internal Springs
Sturdy
Compatibility
Precision
USB Cable
Extra Height
Combo Mount
14" Riser
On-Stage Front Address Pop Filter for EV RE20 and RE320
Designed for the EV RE20 and RE320, the On-Stage Front Address Pop Filter helps mitigate plosives and breath noise during vocal recording and broadcast applications such as voiceover work, radio interviews, and podcasts. The pop filter features a 3" nylon filter that not only reduces P sounds and B sounds but also helps prevent corrosive moisture from damaging your microphone's delicate diaphragm.
The rubber-coated 1.9" clamp holds the filter in place and prevents scratches to the microphone's finish. The depth and angle of the 4.75" shaft and nylon pop screen are adjustable, allowing for a quick and easy setup. The pop filter is also compatible with the Rode Podcaster and Procaster microphones
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Capsule | 1 x Dynamic |
| Diaphragm | 1.10" / 28 mm |
| Polar Pattern | Cardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| High-Pass Filter | None |
| On-Board Controls | Headphone Volume |
Performance
| Frequency Range | 40 Hz to 14 kHz |
| Maximum SPL | 115 dB SPL Peak |
| Sensitivity | -51 dB |
Connectivity
| Output Connectors (Digital) | 1 x USB Type-B |
| Headphone Connector | 1 x 1/8" / 3.5 mm |
Digital Audio
| A/D Conversion | 24-Bit |
| Sample Rate | Up to 96 kHz |
| Operating System Support | Windows, macOS/OS X |
Power
| Bus Power | USB |
| Operating Voltage | Not Specified by Manufacturer |
Physical
| Color | Black |
| Mounting | Tabletop (Included) |
| Dimensions | ø: 2.05 x L: 8.46" / ø: 52 x L: 215 mm |
| Weight | 1.44 lb / 655 g |
Rode PSM1 Shockmount For Rode Podcaster Or Procaster Microphone Specs
| Dimensions | 6.1 x 4.8 x 4.3" / 15.5 x 12.2 x 11 cm |
| Weight | 13.8 oz / 390 g |
Auray BAI-2U Two-Section Broadcast Arm With Internal Springs And Integrated USB Cable Specs
| Form Factor | Studio Microphone Arm with Mount |
| Color | Black |
| Total Reach | 40" / 101.6 cm |
| Thread Size | 5/8"-27 |
| Riser Height | 14.00" / 35.56 cm |
| Load Capacity | 5 lb / 2.27 kg |
| Included Cable | Integrated |
| Cable Length | 10' / 304.8 cm |
| Audio Connector Type | USB Type-B |
| Clamp Range | 2.3" / 5.8 cm |
| Weight | 4.47 lb / 2.02 kg |
On-Stage Front Address Pop Filter For EV RE20 And RE320 Specs
| Filter Type | Pop Filter |
| Filter Size | 3" / 76.2 mm Diameter |
| Attachment Style | Clamp with Screw, On-Mic |
| Adjustable Height | None |
| Clamp Width | 1.9" / 48.26 mm |
| Filter Material | Nylon |
| Material of Construction | Aluminum, Nylon, Plastic, Rubber |
| Length | 4.75" / 120.65 mm |
Payment & Security
Dine betalingsoplysninger behandles sikkert. Vi gemmer ikke kreditkortoplysninger og har heller ikke adgang til dine kreditkortoplysninger.